Those who opted for Hyderabad please share ur attempts ?? Mine 84 ..
rbi kolkata anybody?
First shift walo ka normalisation thand ke basis pe bhi hona chahiye 😒. Haath hi nhi chal raha tha shuru ke 3-4 minutes tak toh🤧.
Only candidates for RBI (lucknow and kanpur) tell your attempts. Genuine attempts, no fake. Aur kisi doosre state waale na karen please.
- 70-75
- 90+
- 85-90
- 80-85
- 75-80
0 voters
For those who filled for Bhopal...What's ur attempts....mine 84.
- 70-80
- 81-85
- <70
- 86-90
-
90
0 voters
Anyone who gave the mains last year,what was the level of mains ??
Only Maharashtra guys share ur attempts...
- Accuracy ws not up to the mark
- 95-100
- 90-95
- 85-90
- 80-85
- 75-80
- I’m not in the race
- I hv my exam today
0 voters
Kolkata Guys... Attempts ??
Started preparing for mains ?
- yes
- waiting for results
- no
0 voters
Although the paper was easy but was the 4th shift on 27th November the most difficult shift compared to other shifts?
- No
- Yes
- All shifts were equally easy
0 voters
🏗 🏛 Building Materials and Construction, Objective Type Question Part-I 🚧

Gypsum is a : Chemically Precipitated Sedimentary Rock
Sedimentary rocks which changes into quartzite by metamorphic action: Sand Stone
Quartzite is a: Silicious Rock
Slate is formed by metamorphic action of: Shale
Sandstone is a: aqueous, silicious & sedimentary rock
A heavy stone is suitable for: Retaining Walls
Stone suitable for rubble masonary should be: Tough
Which metamorphic rock has the most weather resisting characteristics: Quartzite
A good building stone should not absorb water more than: 5%
Jumper is a tool used for: Quarrying Of Stone
The important test to be conducted on a stone used in docks & harbours is: Weight Test
The predominant constituent which is responsible for strength in granite is: Quartz
Granite is not suitable for ordinary building purpose because: It is costly
Stone which is suitable for construction of piers & abutments of a railway bridge: Granite
The p[reparation of surface of stone to obtain plain edges or to obtain stones of required size & shape is known as: Dressing Of Stones
Crushing strength of good building stone should be more than: 100Mpa
Specific gravity for most of building stones lies between: 2.5 to 3.0
Spalling Hammer is used for: Breaking small projection of stones
Cross cut saw is used for: Cutting Hard Stones
Sapwood consists of : Portion of timber between heartwood and cambium layer
The radial splits which are wider on the outside of the log & narrower towards the pith are known as: Starshakes
Trees yielding soft wood: Chir & Deodar
A tree yielding hard wood: Shishum
The disease of dry rot in timber is caused by: Lack of ventilation
Plywood has the advantage of: Same tensile strength in all directions
In which of the following directions, the strength of timber is maximum: Parallel to grains
The moisture content in a well seasoned timber is : 10% to 12 %
The trunk of tree left after cutting all the branches: Log
The age of tree can be known by examining: Annual Rings
Plywood is made by bounding together thin layers of wood in such a way that the angle between grains of any layer to grains of adjacent layers is : 90 degree
The plywood has: greater impact resistance to blows than ordinary wood
The practical limit of moisture content achieved in air drying of timber is: 15%
First class timber has an average life of: More than 10 years
Crushing Strength of 1st Class brick should not be less than: 10.5 N/mm2
The main fuction of alumina in brick earth is : To impart plasticity
The % of alumina in good brick earth lies between: 20% – 30%
Excess of alumina in brick earth makes the brick: To crack & warp on drying
The nominal size of modular brick is: 200mm x 200mm x 100mm
Percentage of silica in good brick earth lies between: 50% to 60%
Excess of silica in brick earth results in: Loss of cohesion
Which ingredient of brick earth enables the brick to retain it’s shape: Silica
Building Materials and Construction, Objective Type Question Part-II

The process of mixing clay, water & other ingredients to make brick is known as:Kneading
Advantage of a clamp compared to a kiln for burning bricks is: It has less initial cost
The internal size of mould used in brick preparation is: Greater than size of fully burnt brick
Pug mill is used for: Preparation Of Clay
Bricks used for lining of furnaces: Refractory Bricks
The frog of brick in a brick masonry is generally kept on: Top Face
Number of bricks required for one cubic meter of brick masonry is: 500
Glazing is used to make earthenware: Impervious
Quick lime is: Calcium Oxide
Quick lime is: Slow in setting & Rapid in slacking
Hydraulic lime is obtained by: Burning of kankar
The main constituent which imparts hydraulicity to hydraulic lime is: Clay
The main ingredients of Portland Cement are: Lime & Silica
The constituent of cement which is responsible for initial setting of cement is: Tricalcium Aluminate
The initial setting time for ordinary
What should be the cut off for Maharashtra region?
4th slot ki puzzle yaad Hai kisi ko month waali ... Usme first and last kon bethe the ??
Hyderbad Region i attemted 67
Reasng 34 vth 98percnt
Quant 17 vth 100percnt
Englsh 16
Wt R my chances? Shift 4.3.30
Thoda Mushkil hi last
jaipur expected cutoff
UR-78-80
OBC-76-78
SC-75-77
ST-65-67
- YES
- NO +/- 2
0 voters
Did only 82 complete meltdown 😫. Aage koi de RHA h complete English and reasoning first chahe kitna strong quant ho. Word problem bhut gande aa rhe. Chalo good luck jinka aage hai and also for clerk. Main ab ek mahina SSC tier 2 pe focus krunga.
kal last shift mai there was one question: what is probability of selecting five nos. in sequence from 1 2 3 4 5, without replacement?? How to do it???
for rrb intrviews bngal candidates
https://www.pagalguy.com/discussions/ibps-rrb-po-1-interview-bengal-only-5180690227265536
RBI HYDERABAD ATTEMPTS
- <80
- 96-100
- 91-95
- 86-90
- 80-85
0 voters